Errors
Error State
The device will enter an error state when a non-recoverable issue occurs.
A message will be sent over CAN and/or USB and the Error LED will flash the error number.
Warning
The only way to reset from an error is to cycle power on the device.
Error Numbers
| Error # | Description |
|---|---|
| 1 | Watchdog |
| 2 | Message Queue |
| 3 | Task |
| 4 | Configuration |
| 5 | FRAM |
| 6 | ADC |
| 7 | Temperature Sensor |
| 8 | USB |
| 9 | CAN |
| 10 | CRC |
| 11 | I2C |
| 12 | RCC |
| 13 | Temperature |
| 14 | PWM |